Propane & CO2

Propane Fill Station

Cylinder Recertification

Rules for Cylinder Recertification:

• Cylinder Must Not have over 10% visible rust
• Blistered or Bubbled Rust is unacceptable
• Dents larger than a 1/4″ not acceptable
• Valve must be OPD rated with OPD on the Handle
• Valve cannot have oxidized green Anhydrous staining visible
• Foot Ring must be intact
• Bottom of tank must be visually stable
• All Stamped ID and Specs on collar must be readable
• Dark Painted Cylinders will not be filled or re-certified
• Any cylinder that shows signs of tampering or abuse

If cylinders brought for recertification are overly greased they need to be cleaned. Cylinders with visible rust should be painted with a light color Rustoleum paint.

Cylinder recertification must be done 12 years from the date stamped on the cylinder collar.  Recertification should be performed by a Federally Licensed Propane Dealer.  Our Federal License Number is #V100368.  Recertification is FREE!

AFTER recertification of your cylinder that certification is valid for 5 years, and needs to be certified again.

Please refer to the rules of recertification.

CO2 Fill Station

Our Maximum Capacity for fill is 15lb. cylinders.

Paint Ball Cylinders, Nailer Cartridges, Beverage and Beer Cylinders, Air Tool CO2 cylinders, Aquarium Cylinders

All cylinders for refill must be certified and within date.  All CO2 approved cylinders must be inspected and re-certified every 5 years.  The Country Hearth is not certified to perform CO2 Cylinder Recertification procedures. We can provide local recertification agencies Qualified to Perform Recertification.